The SMD aluminum Electrolytic capacitor is used in the pulsating circuit, and the main factor causing power consumption and heating is the ripple current (ripple voltage for capacitors with smaller capacity). Generally, the relationship curve between Failure rate and temperature is measured under the DC voltage without……

In line aluminum Electrolytic capacitor is one of Electrolytic capacitor, also called plug-in capacitance, lead capacitance. The in-line Electrolytic capacitor uses a metal foil (aluminum) as the positive electrode, and the insulating oxide layer (aluminum oxide) of the metal foil as the dielectric. The negative electr……

Use of aluminum Electrolytic capacitor 1. DC isolation: to prevent DC from passing through and allow AC to pass through. 2. Bypass (decoupling): Provides a low impedance path for certain parallel components in an AC circuit. 3. Coupling: As a connection between two circuits, it allows AC signals to pass through and tra……

Structural features of Aluminum electrolytic capacitor: the aluminum shell and plastic cover are sealed to form a Electrolytic capacitor. Compared with other types of capacitors, aluminum Electrolytic capacitor have the following obvious characteristics in structure: (1) The working medium of aluminum Electrolytic capa……

1、 The role of high-voltage Electrolytic capacitor in the circuit (1) In the transmission line, high-voltage capacitors can be used to form series compensation stations to improve the transmission capacity of the transmission line. (2) In large substations, the use of high-voltage capacitors can form a static phase con……

The aluminum Electrolytic capacitor is made of an aluminum cylinder as the negative electrode, which is filled with liquid electrolyte, and inserted with a curved aluminum strip as the positive electrode. It also requires direct current voltage treatment to form a layer of oxide film on the positive electrode as the me……

The advantages of Huake SMT capacitors are: 1. Small size and light weight; 2. Adapt to reflow soldering and wave soldering; 3. The layered electrode structure has stable electrical performance and high reliability; Low assembly cost and matching with automatic mounting equipment; 4. High mechanical strength and superi……

How to select the high-voltage capacitor 1. Try to select the prototype high-voltage Electrolytic capacitor. 2. Generally, the capacitance error of high-voltage Electrolytic capacitor is larger, which will not seriously affect the normal operation of the circuit, so it can be replaced by capacitors with slightly larger……

In line aluminum Electrolytic capacitor is one of Electrolytic capacitor, also called plug-in capacitance, lead capacitance. The in-line Electrolytic capacitor uses a metal foil (aluminum) as the positive electrode, and the insulating oxide layer (aluminum oxide) of the metal foil as the dielectric. The negative electr……

The resistance that hinders the passage of AC current at a specific frequency is called impedance. It is closely related to the capacitance and inductance values in the capacitance equivalent circuit, and is also related to ESR. The capacitance impedance of the capacitor gradually decreases with the increase of frequen……

The identification and application of long-life Electrolytic capacitor components are as follows: First, the main faults of the capacitor detection capacitor are: breakdown, short circuit, leakage, capacity reduction, deterioration and damage. 1、 Appearance inspection observation: The appearance should be intact and un……

Composition of precision chip resistors: Two terminal electronic components made of resistive materials, with a certain structural form, capable of limiting the passage of current in the circuit. A fixed resistor is one whose resistance cannot be changed. The variable resistance is called Potentiometer or variable resi……